|
This document provides release notes on the latest firmware updates so that you can decide whether or not to update your product. Firmware version 3.20 Release date: 03/08/2009
Changes/additions
• Addition schedules (up to 4) can be used with various functions
• Added wireless signal strength level meter when searching for SSID
• Added wireless signal strength level meter in the System page
Bug Fixes
• FTP Remote path couldn’t handle 2 level path, such as xxx/xxx Firmware version 2.56 Release date: 25/03/2009
Changes/additions
• Add auto in moonlight mode
• UPnP support for Leviton routers
• Add MAC address in UPnP discovery information.
• Add Model name in RTSP DESCRIBE.
• Add Allow anonymous access in User Management page.
Bug Fixes
• WiFi connection issues Firmware version 2.50 Release date: 04/01/2009
Changes/additions
• Green LED will flash on WiFi data activity
• Motion detection doesn't trigger when Infrared status changes
Bug Fixes
• Compatibility with BTHomeHub V2.0 Firmware version 2.39
Release date: 08/12/2008
Changes/additions
• Changed reboot sequence to a hardware reboot
Bug Fixes
• Wireless stability
• FTP buffer stops sending batch files after a 550 reply from server
• Watch-dog boot time Firmware version 2.38
Release date: 25/11/2008
Changes/additions
• Add hardware communications Watch-Dog
• Added URL Command captureBufImage
Bug Fixes
• Night Vision turn-off threshold
• Send ftp image when wireless connection is lost and then regained Firmware version 2.35 Release date: 29/10/2008
Changes/additions
• Added more mobile phone compatibility, including Blackberry (Bold/Storm)
• Changed stream setup page to add the Preset entry to help users setup frame rate and bit rate
• Added audio stream rtsp://x.x.x.x/live_amr_audio.sdp
• Improved WiFi compatibility
• Added RTSP over HTTP protocol support
Bug Fixes
• Nill Firmware version 2.29
Release date: 11/09/2008
Changes/additions
• Changed the night vision control program
• Added a hidden URL command for night vision adjustment#
• Changed text "Alarm sending setup accepted successfully!" to "Alarm Management ..." after clicking apply button
• Changed text "Buffer sending setup accepted successfully!" to "Buffer Management ..." after clicking apply button
Bug Fixes
• Some mobile phone can't play the live with audio. Firmware version 2.28
Release date: 09/09/2008
Changes/additions
• Changed some text on user interface
• Show time according date format in Data & time setup page
• Removed Privacy mode in Camera setup page
• Moved all contents of Misc setup page to Camera setup page, and remove the Misc setup from web setting menu
• Removed "Enable/Disable" of Primary stream in Stream setup page
• Remove RTSP port and Notice text in TCP/IP setup page
• Added note text in UPNP setup page
• Changed "Alarm Sending" to "Alarm Management"
• Changed "Periodical" to "Periodic"
• Changed "Buffer Sending" to " Buffer Management"
• Added Mobile page, http://x.x.x.x/mobile
Bug Fixes
• http event looses the configuration file Firmware version 2.27
Release date: 01/09/2008
Changes/additions
• Added 3GPP audio support in stream setup page
Bug Fixes
• Resolved the minor stability issues Firmware version 2.26
Release date: 29/08/2008
Changes/additions
• Added Authentication method in TCP/IP setup page, default is Basic Authentication
Bug Fixes
• Buffertime(1-20) and buffer FPS(1-10) validation
• Video encode performance
• http event does not work Firmware version 2.25
Release date: 15/08/2008
Changes/additions
User interface changed as follows:
• Added Schedule Setup
• Added HTTP event setting
• Added Privacy mode in Camera setup page
• Added Night Vision mode in Night Vision setup page
• Replaced the newest video driver and ipcamd application.
• Changed the Motion Detection parameters.
• Added "Use MAC address as URL suffix" in HTTP event alarm/period sending setup page
• Changed camera setup page
• Added stream setup page
• Move Moonlight setting from Night Vision to Camera setup page
• Removed RTSP setup page
• Added RTSP port and RTP port range in TCP/IP Setup page
• Changed UPnP setup page
• Move Show FPS in ActiveX to Misc Setup page
• FTP always keeps connection when Keep Alive set to 0
• Added UPnP RTP port forwarding support
• FTP, Email can snapshot even if Disable the stream, but users can't use http://xxx.xxx.xxx.xxx/snapshot1.jpg to get picture.
• Added a OSD type in OSD Setup page.
• Changed System name to 0~30 characters, and the character should be numeric digit or a letter of the alphabet.
• Added Date and time format in Date & Time setting page
• Improved compatibility of 3GPP
• Changed URL Command, see "Y-cam SDK V2" document. Firmware version 2.21
Release date: 15/08/2008
Changes/additions
User interface changed as follows:
• Changed alarm setup:
• Alarm Sending
• Periodical Sending
• Buffer Sending
• Added Alarm Server:
• FTP Server
• e-Mail Server
• HTTP Server
• Added Schedule Setup
• Added HTTP event setting
• Added Privacy mode in Camera setup page Firmware version 2.10
Release date: 04/07/2008
Changes/additions
• Changed the length of SSID from 15 to 32
• Add Auth type(open system and shared key) in Wireless WEP
• Add the max URL length to 512
• Add wireless test function in wireless setup page.
• Added RTSP stream
Bug Fixes
• Can't connect to some wireless routers.
• Reboot problem
• Wireless check problem
• Can't use spec char in URL
• Wireless can't connect if WPA key includes a space character Firmware version 2.02
Release date: 22/05/2008
Changes/additions
• Show Current users who visit the camera live in system information page
Bug Fixes
• When URL command is too long execution would fail
• URL command can't include char "@" ";" in IE7
• Wireless can't connect when Router's SSID is hidden Firmware version 2.00
Release date: 14/05/2008
Notes:
First release for 2nd generation cameras
Features added from latest release of 1st Generation cameras
• Motion JPEG stream
• Text and/or time and date overlay on Image
• E-mail SSL support If you have any questions regarding upgrading your firmware, please contact Support. |
